Cisco Catalyst 6800 - Switch - 8 x 40 Gigabit Ethernet - plug-in module Cisco | C6800-8P40G=

Backplane connection: 160-Gbps backplane bandwidth in Catalyst 6807-XL chassis
Chassis/slot support
Supervisor engine: compatible with Supervisor Engine 2T, Supervisor Engine 2TXL, Supervisor Engine 6T, and Supervisor Engine 6TXL
Distributed forwarding and performance

Product Information
Extended spec
Documents

Your Best Price
£36,949.34 ex. VAT

Out of stock

General
Device Type	Switch - 8 ports
Enclosure Type	Plug-in module
Subtype	40 Gigabit Ethernet
Ports	8 x 40 Gigabit Ethernet
Performance	Switching fabric speed: 160 Gbps ¦ MPLS forwarding: 120 Mpps ¦ VPLS forwarding: up to 60 Mpps
Capacity	IPv6 routes (Multicast): 64000 ¦ IPv4 routes (Multicast): 64000 ¦ ACL entries: 64000 ¦ MPLS forwarding entries: ¦ IPv4 forwarding entries: 256000 ¦ IPv6 forwarding entries: 128000 ¦ NetFlow entries: 1000000 ¦ Bridge domains: 16000 ¦ Replication engines per module: 8
MAC Address Table Size	128K entries
Jumbo Frame Support	9216 bytes
Routing Protocol	IGMPv3, MLDv2
Encryption Algorithm	128-bit AES
Features	Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Deficit Weighted Round Robin (DWRR), Shaped Round Robin (SRR), NetFlow, Class of Service (CoS), Flexible NetFlow (FNF), DiffServ Code Point (DSCP) support, MACsec support, Location ID Separation Protocol (LISP), Virtual Switching System (VSS), IF MIB, Sampled NetFlow, Hierarchical Quality of Service (HQoS), ISATAP tunnel support, Egress NetFlow, Protocol Independent Multicast (PIM), Fast Link Notification (FLN), ingress and egress replication mode
Compliant Standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3ba
RAM	2 GB
Built-in Devices	2 x DFC4-E daughter cards
Status Indicators	Port status, Boot State, operation mode, fault
Expansion / Connectivity
Interfaces	8 x 40Gbit LAN QSFP
Power
Power Consumption Operational	587.6 Watt
Miscellaneous
Compliant Standards	CISPR 22 Class A, CISPR 24, EN55024, EN55022 Class A, EN50082-1, EN 61000-6-1, AS/NZS 60950-1, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, CAN/CSA C22.2 No. 60950, VCCI Class A, KN22 Class A, ETS 300 386, EN61000-3-2, EN61000-3-3, FCC CFR47 Part 15 A, CNS 13438 Class A, 21 CFR 1040, KN 61000-4, EN 60825 Class 1, IEC 60825 Class 1
Software / System Requirements
OS Required	Cisco IOS 15.5(1)SY
Dimensions & Weight
Width	39.11 cm
Depth	41.65 cm
Height	4.39 cm
Weight	5.68 kg
Manufacturer Warranty
Service & Support	Limited warranty - advance parts replacement - 1 year - response time: 10 days
Environmental Parameters
Min Operating Temperature	0 °C
Max Operating Temperature	40 °C
Humidity Range Operating	10 - 90% (non-condensing)
Min Storage Temperature	-40 °C
Max Storage Temperature	75 °C

IT Services

Cyber Security

IT Support

Cloud Services

Reports and Guides

Case Studies

Blog Posts

Probrand News

Cisco Catalyst 6800 - Switch - 8 x 40 Gigabit Ethernet - plug-in module Cisco | C6800-8P40G=

Product Information

Extended Spec

Contact centre

Contact Centre

Call Us

Customer IT Support

Customer IT Support

Live Chat

Cisco Catalyst 6800 - Switch - 8 x 40 Gigabit Ethernet - plug-in module Cisco | C6800-8P40G=

Product Information

Extended Spec