| General |
|
| Device Type |
Switch - 40 ports - L3 - Managed - stackable - with Cisco 40GE Network Module (C9500-NM-2Q) |
| Enclosure Type |
Rack-mountable 1U |
| Subtype |
10 Gigabit Ethernet |
| Ports |
40 x 10 Gigabit SFP+ + 2 x 40 Gigabit QSFP+ |
| Performance |
Switching capacity (full duplex): 480 Gbps ¦ Forwarding rate: 720 Mpps |
| Capacity |
Indirect IPv4 routes: 64000 ¦ Host IPv4 routes: 32000 ¦ Indirect IPv6 routes: 32000 ¦ Host IPv6 routes: 16000 ¦ Multicast scale: 48000 ¦ QoS ACL scale: 18000 ¦ Security ACL scale: 18000 ¦ FNF entries: 512000 ¦ VLAN IDs: 4000 ¦ Switched virtual interfaces (SVIs): 4000 |
| MAC Address Table Size |
64K entries |
| Jumbo Frame Support |
9198 bytes |
| Routing Protocol |
OSPF, RIP-1, RIP-2, IGMP, VRRP, PIM-SM, PIM-SSM, policy-based routing (PBR), RIPng |
| Remote Management Protocol |
SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, NETCONF, RESTCONF |
| Encryption Algorithm |
256-bit AES |
| Features |
NAT support, IPv6 support, Stateful switchover (SSO), Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Multiple Spanning Tree Protocol (MSTP) support, MLD snooping, Rapid Per-VLAN Spanning Tree Plus (PVRST+), Remote Switch Port Analyzer (RSPAN), Management Information Base (MIB), Flexible NetFlow (FNF), 802.1x authentication, MACsec support, Control plane protection (CoPP), VLAN Double Tagging (Q-in-Q), Private VLAN, Zero-touch provisioning (ZTP), CoAP support, secure boot, Switched Port Analyzer (SPAN), First Hop Security (FHS) |
| Compliant Standards |
IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3ba |
| Flash Memory |
16 GB |
| Built-in Devices |
RFID tag |
| Status Indicators |
Status |
| Expansion / Connectivity |
|
| Interfaces |
40 x 10GBase-X SFP+ ¦ 2 x 40Gbit LAN QSFP+ |
| Expansion Slots |
1 (total) / 0 (free) x expansion slot |
| Power |
|
| Power Device |
Internal power supply - hot-plug |
| Installed Qty |
2 (installed) / 2 (max) |
| Power Redundancy |
Optional |
| Power Redundancy Scheme |
1+1 |
| Power Provided |
950 Watt |
| Voltage Required |
AC 120/230 V (50 - 60 Hz) |
| Features |
Front-to-rear air?ow |
| Miscellaneous |
|
| MTBF |
180,640 hours |
| Compliant Standards |
CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, AS/NZS 60950-1, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, GB 4943, VCCI Class A, KN24, KN22 Class A, AS/NZS CISPR22:2004 Class A, EN 55022 Class A, FCC CFR47 Part 15 A, CNS 13438 Class A, EN 300 386, KN 61000-4, CAN/CSA-C22.2 No. 60950-1 |
| Software / System Requirements |
|
| Software Included |
Cisco IOS Universal, Cisco ONE Essentials High Term (Includes Term Licenses for DNA Essentials, 25 ISE Base Endpoints. Requires separate purchase of ISE Appliance or ISE VM) |
| Dimensions & Weight |
|
| Width |
44.5 cm |
| Depth |
54.7 cm |
| Height |
4.39 cm |
| Weight |
11.68 kg |
| Manufacturer Warranty |
|
| Service & Support |
Limited warranty - replacement - lifetime - response time: next business day ¦ Technical support - consulting - 90 days |
| Environmental Parameters |
|
| Min Operating Temperature |
0 °C |
| Max Operating Temperature |
40 °C |
| Humidity Range Operating |
5 - 90% (non-condensing) |
| Min Storage Temperature |
-20 °C |
| Max Storage Temperature |
65 °C |
| Humidity Range Storage |
5 - 95% (non-condensing) |