| General |
|
| Device Type |
Switch - 54 ports - L3 - Managed - stackable |
| Enclosure Type |
Front to back airflow rack-mountable 1U |
| Subtype |
10 Gigabit Ethernet |
| Ports |
48 x 10 Gigabit SFP+ + 6 x 40 Gigabit QSFP+ / 100 Gigabit QSFP28 |
| Performance |
Switching capacity: 2.16 Tbps ¦ Forwarding rate: 1.60704 Gpps |
| Capacity |
Packet buffer size: 32 MB ¦ IPv4 routes (static): up to 32000 ¦ IPv6 routes (static): up to 16000 ¦ IPv4 forwarding entries: up to 144000 ¦ IPv6 forwarding entries: up to 144000 |
| MAC Address Table Size |
288K entries |
| Jumbo Frame Support |
9216 bytes |
| Routing Protocol |
RIP-1, RIP-2, BGP, IGMPv2, IGMP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, OSPFv3, PIM-SSM, DVMRPv3, MLDv2, MLD, VRRPv2, MPLS, VRRPv3, MSTP, RSTP, STP |
| Remote Management Protocol |
SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, SMTP |
| Encryption Algorithm |
SSL, TLS 1.2 |
| Authentication Method |
RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
| Features |
DoS attack prevention, SNTP support, sFlow, DHCP snooping, Quality of Service (QoS), MPLS VPN, LLDP support, DNS relay, Virtual Routing and Forwarding (VRF), Neighbor Discovery Protocol (NDP), Virtual Circuit Connectivity Verification (VCCV), Generic VLAN Registration Protocol (GVRP), SNMP support, Generic Routing Encapsulation (GRE), Type of Service (ToS), DiffServ Code Point (DSCP) support, Ethernet Ring Protection Switching (ERPS), 5 fans, OpenFlow support, Virtual Private LAN Service (VPLS), Priority-Based Flow Control (PFC), Bridge protocol data unit (BPDU), Label Distribution Protocol (LDP), Ethernet Ring Protection Switching (ERPS) v2, Weighted Deficit Round Robin (WDRR), Switch Resource Management (SRM), LLDP-MED, Ethernet OAM, Weighted Round Robin (WRR), MAC based VLAN, loopback detection, port-based VLAN, D-Link Discovery Protocol (DDP), Committed Information Rate (CIR), Microsoft Network Load Balancer (NLB) |
| Compliant Standards |
IEEE 802.1D, IEEE 802.1Q, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1v, IEEE 802.1ag, IEEE 802.1AX, IEEE 802.1Qbb, ITU-T Y.1731 |
| Expansion / Connectivity |
|
| Interfaces |
48 x 10GBase-X SFP+ ¦ 6 x 100Gbit/40Gbit LAN QSFP28/QSFP+ ¦ 1 x console RJ-45 ¦ 1 x management (Gigabit LAN) RJ-45 ¦ 1 x alarm ¦ 1 x micro-USB 2.0 Type A |
| Power |
|
| Power Device |
Internal power supply - hot-plug |
| Installed Qty |
2 (installed) / 2 (max) |
| Power Redundancy |
Yes |
| Power Redundancy Scheme |
1+1 |
| Voltage Required |
AC 120/230 V (50/60 Hz) |
| Power Consumption Stand by |
120.6 Watt |
| Miscellaneous |
|
| Included Accessories |
4 rubber feet, 2 x 19" mounting brackets |
| Cables Included |
1 x console cable ¦ 1 x micro-USB cable |
| Rack Mounting Kit |
Included |
| MTBF |
94,262 hours |
| Compliant Standards |
VCCI, C-Tick, cUL, CB, IC, FCC, LVD |
| Dimensions & Weight |
|
| Width |
44.1 cm |
| Depth |
48.744 cm |
| Height |
4.35 cm |
| Weight |
9.8 kg |
| Environmental Parameters |
|
| Min Operating Temperature |
0 °C |
| Max Operating Temperature |
45 °C |
| Humidity Range Operating |
0 - 95% (non-condensing) |
| Min Storage Temperature |
-40 °C |
| Max Storage Temperature |
70 °C |