Skip to main content

NETGEAR Smart MS510TXUP - Switch - L3 Lite - smart - 4 x 100/1000/2.5G (PoE++) + 4 x 100/1000/2.5/5/10G (PoE++) + 2 x 10 Gigabit SFP+ (uplink) - rack-mountable, desktop - PoE++ (295 W)

NETGEAR | MS510TXUP-100EUS
MS510TXUP-100EUS
MS510TXUP-100EUS
MS510TXUP-100EUS
MS510TXUP-100EUS
MS510TXUP-100EUS
MS510TXUP-100EUS
  • Connect and power your WAX610 with MS510TXUP
  • Manage all devices from a single dashboard with NETGEAR Insight Powerful Connectivity and Security
  • Advanced VLAN support for better network segmentation
  • L2/L3/L4 access control lists (ACLs) for granular network access control including 802.1x port authentication
  • Advanced per port PoE controls for remote power management of PoE powered devices including operation scheduling
  • Advanced QoS (Quality of Service) for traffic prioritization including portbased, 802.1p and L2/L3/L4 DSCPbased
  • Auto "denial-of-service" (DoS) prevention
  • IGMP Snooping and Querier for multicast optimization
  • Egress Rate limiting and priority queuing for better bandwidth allocation
  • Port mirroring for network monitoring
  • Energy Efficient Ethernet (IEEE 802.3az) for maximum power savings
  • IPv6 management: IPv6 QoS, IPv6 ACL, IPv6 Multicast, and static and dynamic IPv6 address assignment
  • Cable test to troubleshoot connection issues
  • Easy-to-use Web browser-based management GUI available in English, German and Japanese
  • SNMP v1, v2c, v3 and RMON remote monitoring
Getting product prices...

Extended Spec

General
Device Type Switch - 8 ports - L3 Lite - smart
Enclosure Type Desktop, rack-mountable
Ports 4 x 100/1000/2.5G (PoE++) + 4 x 100/1000/2.5/5/10G (PoE++) + 2 x 10 Gigabit SFP+ (uplink)
Power Over Ethernet (PoE) PoE++
PoE Budget 295 W
Performance Fabric throughput: 140 Gbps ¦ Forwarding rate (64-byte packets): 14.8 Mpps ¦ 2.5 Gbps copper latency (64-byte packets): 5.903 µs ¦ 2.5 Gbps copper latency (1518-byte packets): 6.040 µs ¦ 2.5 Gbps copper latency (9216-byte packets): 6.079 µs ¦ 10 Gbps copper latency (64-byte packets): 2.420 µs ¦ 10 Gbps copper latency (1518-byte packets): 2.501 µs ¦ 10 Gbps copper latency (9216-byte packets): 2.499 µs ¦ 10 Gbps fibre latency (64-byte packets): 1.257 µs ¦ 10 Gbps fibre latency (1518-byte packets): 1.337 µs ¦ 10 Gbps fibre latency (9216-byte packets): 1.348 µs
Capacity Packet buffer size: 2 MB ¦ ACL entries (ingress): 100 ¦ VLANs supported: 256 ¦ IGMP groups: 256 ¦ Priority queues: 8 ¦ DHCP snooping entries: 256
MAC Address Table Size 32000 entries
Jumbo Frame Support 10KB
Routing Protocol IGMPv2, IGMP, IGMPv3, MLDv2, MLD, MSTP, RSTP, STP
Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, HTTP, HTTPS, IPv6, RSTP, TACACS+, RADIUS
Encryption Algorithm TLS 1.2
Authentication Method RADIUS, TACACS+, Extensible Authentication Protocol (EAP)
Features Flow control, IGMP snooping, Syslog support, DoS attack prevention, port mirroring, DiffServ support, store and forward, Broadcast Storm Control, full duplex mode, Multicast Storm Control, Unicast Storm Control, firmware upgradable, SNTP support, DHCP snooping, Access Control List (ACL) support, LLDP support, Link Aggregation Control Protocol (LACP), DHCP client, Dynamic VLAN Support (GVRP), dual firmware images, loop prevention, Strict Priority (SP), 802.1x authentication, cloud managed, VoIP support, DiffServ Code Point (DSCP) support, 3 fans, cable test, Bridge protocol data unit (BPDU), IGMP querier, DNS client, Voice VLAN, LLDP-MED, Guest VLAN, User Datagram Protocol (UDP), protected ports, Zero-touch provisioning (ZTP), Energy-Efficient Ethernet (EEE), Weighted Round Robin (WRR), loopback detection, egress rate limiting, block unknown multicast, Advanced QoS, Unknown Storm Control, Extensible Authentication Protocol over LAN (EAPOL)
Compliant Standards IEEE 802.1D, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3az, UPnP
RAM 256 MB
Flash Memory 64 MB
Status Indicators Power, fan, link/activity/speed, PoE max
Expansion / Connectivity
Interfaces 4 x 100/1000/2.5G RJ-45 PoE++ - 60 W ¦ 4 x 100/1000/2.5G/5G/10G RJ-45 PoE++ - 60 W ¦ 2 x 10GBase-X SFP+ uplink
Power
Power Device Internal power supply
Installed Qty 1
Power Consumption Operational 380 Watt
Miscellaneous
Included Accessories Rubber feet
Rack Mounting Kit Included
MTBF 848,553 hours
Localisation Europe
Dimensions & Weight
Width 33 cm
Depth 20.6 cm
Height 4.3 cm
Weight 2.51 kg
Manufacturer Warranty
Service & Support Limited warranty - replacement - lifetime - response time: next business day
Environmental Parameters
Min Operating Temperature 0 °C
Max Operating Temperature 50 °C
Humidity Range Operating 90% (non-condensing)
Min Storage Temperature -20 °C
Max Storage Temperature 70 °C
Humidity Range Storage 95% (non-condensing)
Getting your best price...

Want a better price?

Register now to unlock personalised pricing and access exclusive platform features tailored to your organisation.

Sign Up for FREE Request Demo

Join our FREE platform to streamline your IT procurement with governance tools, budget management features and automated discounts, all connected to an authorised supply chain.


Governance & Control

Role-driven purchasing configured with unique management tools.

Pricing Options

Access personalised pricing and volume discounts.

Order Management

Track orders in real-time and access electronic invoicing.

Hardware
Networking
Hubs & Switches
Managed Switches
Rack-Mountable Hubs & Switches

Contact centre

Contact Centre

Procurement Platform Helpdesk

Get assistance with the platform

0121 815 8700
customersuccess@probrand.co.uk
General Enquiries

Speak to our Sales Team

0800 015 7299
IT Support Desk

Support for our Managed Service Customers

0121 248 7932
Raise Support Ticket
Install Remote Support Tool
Live Chat

Want to talk to an advisor?
Click the chat button below