| General |
|
| Device Type |
Switch - 48 ports - L3 - Managed |
| Enclosure Type |
Rack-mountable 1U |
| Subtype |
25 Gigabit Ethernet |
| Ports |
48 x 25 Gigabit SFP28 + 8 x 100 Gigabit QSFP28 + 2 x 1 Gigabit / 10 Gigabit SFP+ |
| Performance |
Latency (10 Gbps): 1 µs ¦ Throughput: up to 2.796 Gpps ¦ Routing/switching capacity: 3.2 Tbps |
| Capacity |
Virtual interfaces (VLANs): 4096 ¦ IPv4 routing table entries: 128000 ¦ IPv6 routing table entries: 64000 |
| MAC Address Table Size |
136K entries |
| Jumbo Frame Support |
9416 bytes |
| Routing Protocol |
OSPF, RIP, BGP-4, IS-IS, RIP-2, BGP, IGMP, VRRP, OSPFv3, static IPv6 routing, ECMP, RIPng, IS-ISv6, Bidirectional Forwarding Detection (BFD), BGP+ |
| Remote Management Protocol |
SNMP 1, SNMP 2, Telnet, SNMP 3, SNMP 2c, SSH, CLI, SNMP 4 |
| Authentication Method |
Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2) |
| Features |
Flow control, DHCP support, packet filtering, port mirroring, Weighted Round Robin (WRR) queuing, Weighted Fair Queuing (WFQ), sFlow, Virtual Route Redundancy Protocol (VRRP) support, Quality of Service (QoS), Committed Access Rate (CAR), Device Link Detection Protocol (DLDP) support, LLDP support, Link Aggregation Control Protocol (LACP), Ingress Layer 2 MAC Access Control Lists (ACLs), Class of Service (CoS), Strict Priority (SP), reverse airflow support, 16MB packet buffer, In-Service Software Upgrade (ISSU), UDP shaping, Network Timing Protocol (NTP), Weighted Deficit Round Robin (WDRR) |
| Compliant Standards |
IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.1AX, IEEE 802.1Qaz, IEEE 802.3ag |
| RAM |
4 GB |
| Flash Memory |
1 GB |
| Expansion / Connectivity |
|
| Interfaces |
48 x 25Gbit LAN SFP28 ¦ 8 x 100Gbit LAN QSFP28 ¦ 2 x Gigabit / 10Gbit LAN SFP+ ¦ 1 x serial (console) RJ-45 ¦ 1 x management RJ-45 ¦ 1 x management SFP ¦ 1 x USB 2.0 ¦ 1 x mini-USB 2.0 |
| Power |
|
| Power Device |
Internal power supply - hot-plug |
| Installed Qty |
0 (installed) / 2 (max) |
| Power Redundancy |
Optional |
| Power Redundancy Scheme |
1+1 (with optional power supply) |
| Voltage Required |
(50/60 Hz) |
| Miscellaneous |
|
| Compliant Standards |
ETSI, GOST, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, NOM, EN 61000-3-3, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, ICES-003 Class A, EN 61000-4-5, EN 61000-4-11, RoHS, EN 61000-4-8, UL 60950-1, IEC 60950-1, ANATEL, UL-AR, EN 60825-1, ANSI C63.4-2003, EN 60825-2, EN 61000-3-2:2006, VCCI Class A, EN 61000-3-3:1995+A1:2001+A2:2005, AS/NZS CISPR 22, EMC 2004/108/EC, EN 300 386 V1.3.3, EN 55022 Class A, FCC CFR47 Part 15 A, EN 60950-1/A11, FDA 21 CFR, ANSI/TIA-1057, CAN/CSA-C22.2 No. 60950-1, EN 55024:1998+A1:2001+A2:2003 |
| Dimensions & Weight |
|
| Width |
44 cm |
| Depth |
54 cm |
| Height |
4.36 cm |
| Weight |
15 kg |
| Environmental Parameters |
|
| Min Operating Temperature |
0 °C |
| Max Operating Temperature |
45 °C |
| Humidity Range Operating |
10 - 95% (non-condensing) |