| General |
|
| Device Type |
Switch - 48 ports - L3 - Managed |
| Enclosure Type |
Back to front airflow rack-mountable 1U |
| Subtype |
10 Gigabit Ethernet |
| Ports |
48 x 1 Gigabit / 10 Gigabit SFP+ + 4 x 10/40 Gigabit QSFP+ |
| Performance |
Throughput: 1.28 Tbps ¦ Switching capacity: 900 Mpps ¦ Latency: 3.8 µs |
| Capacity |
Virtual interfaces (VLANs): 4096 ¦ ARP entries: 96000 ¦ Longest prefix match (LPM) entries (IPv4): 64000 ¦ Longest prefix match (LPM) entries (IPv6): 12000 ¦ ACL entries: 36000 |
| MAC Address Table Size |
256K entries |
| Jumbo Frame Support |
9216 bytes |
| Routing Protocol |
OSPF, IS-IS, RIP-2, BGP, IGMPv2, VRRP, PIM-SM, static IP routing, IGMPv3, OSPFv3, PIM-SSM, Multiprotocol BGP, MSDP, ECMP, policy-based routing (PBR), Bidirectional Forwarding Detection (BFD) |
| Remote Management Protocol |
SNMP 1, SNMP 2, RMON 2, RMON, Telnet, SNMP 3, SSH-2, CLI |
| Authentication Method |
RADIUS, TACACS+ |
| Features |
Flow control, Layer 3 switching, ARP support, trunking, VLAN support, IGMP snooping, Syslog support, port mirroring, Weighted Round Robin (WRR) queuing, MAC address filtering, IPv6 support, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Jumbo Frames support, Rapid Per-VLAN Spanning Tree Plus (PVRST+), LACP support, DHCP relay, Link Aggregation Control Protocol (LACP), Management Information Base (MIB), hot swappable 4 fans, Class of Service (CoS), tagged VLAN, DiffServ Code Point (DSCP) support, Storm Control |
| Compliant Standards |
IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3ba, IEEE 802.1Qaz |
| Flash Memory |
4 GB |
| Built-in Devices |
120 GB SSD |
| Expansion / Connectivity |
|
| Interfaces |
1 x management (Gigabit LAN) RJ-45 ¦ 1 x management (RS-232) RJ-45 ¦ 48 x Gigabit / 10Gbit LAN SFP+ ¦ 4 x 10Gbit/40Gbit LAN QSFP+ ¦ 1 x USB |
| Power |
|
| Power Device |
Internal power supply - hot-plug |
| Installed Qty |
2 (installed) / 2 (max) |
| Power Redundancy |
Yes |
| Power Redundancy Scheme |
1+1 |
| Power Provided |
500 Watt |
| Voltage Required |
AC 120/230 V (50/60 Hz) |
| Power Consumption Operational |
381 Watt |
| Features |
Rear-to-front airflow |
| Miscellaneous |
|
| Compliant Standards |
C-Tick, BSMI, EN55022, EN55024, CB, CCC, EMC, FCC, UL 60950-1, IEC 60950-1, EN 60950-1, WEEE, NRTL, EAC, MSIP, EN 61000-3-11:2000, EN 61000-3-12:2011, Interseroh, CSA 22.2 No. 60950-1, EN61000-3-3, EN61000-3-2 |
| Dimensions & Weight |
|
| Width |
44.5 cm |
| Depth |
52.3 cm |
| Height |
4.4 cm |
| Weight |
10 kg |
| Environmental Parameters |
|
| Min Operating Temperature |
0 °C |
| Max Operating Temperature |
40 °C |
| Humidity Range Operating |
5 - 95% |
| Min Storage Temperature |
-25 °C |
| Max Storage Temperature |
70 °C |