| General |
|
| Device Type |
Switch - 72 ports - L3 - Managed |
| Enclosure Type |
Back to front airflow rack-mountable 1U |
| Subtype |
40 Gigabit Ethernet |
| Ports |
48 x 1 Gigabit / 10 Gigabit SFP+ + 6 x 40 Gigabit QSFP+ |
| Performance |
Throughput: 1.44 Tbps ¦ Switching capacity: 1080 Mpps ¦ Latency: 550 ns |
| Capacity |
Virtual interfaces (VLANs): 4096 ¦ IGMP groups: 288000 ¦ ACL entries: 11000 ¦ ACL entries (egress): 756 ¦ ECMP groups: 2000 ¦ IPv4 routes (Multicast): 104000 ¦ IPv4 routes (Unicast): 144000 ¦ IPv6 routes (Unicast): 77000 ¦ IPv6 routes (Multicast): 52000 ¦ IPv4 hosts: 208000 ¦ IPv6 hosts: 104000 |
| MAC Address Table Size |
288K entries |
| Jumbo Frame Support |
9216 bytes |
| Routing Protocol |
OSPF, IS-IS, RIP-2, BGP, IGMPv2, IGMP, VRRP, PIM-SM, IGMPv3, OSPFv3, PIM-SSM, Multiprotocol BGP, Bidirectional PIM, ECMP, policy-based routing (PBR), Bidirectional Forwarding Detection (BFD) |
| Remote Management Protocol |
SNMP 1, SNMP 2, RMON 2, RMON, Telnet, SNMP 3, SSH-2, CLI |
| Authentication Method |
RADIUS, TACACS+ |
| Features |
Flow control, Layer 3 switching, Layer 2 switching, load balancing, VLAN support, IGMP snooping, Syslog support, port mirroring, IPv6 support, sFlow, Spanning Tree Protocol (STP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, IPv4 support, DHCP relay, Link Aggregation Control Protocol (LACP), Zero Touch Auto Provisioning, hot swappable 4 fans, Class of Service (CoS), 16MB packet buffer, DiffServ Code Point (DSCP) support, OpenFlow support |
| Compliant Standards |
IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3ba, IEEE 802.1Qaz |
| RAM |
8 GB |
| Flash Memory |
4 GB |
| Expansion / Connectivity |
|
| Interfaces |
1 x management (Gigabit LAN) RJ-45 ¦ 1 x management (RS-232) RJ-45 ¦ 1 x USB ¦ 48 x 1/10Gbit LAN SFP+ ¦ 6 x 40Gbit LAN QSFP+ |
| Power |
|
| Power Device |
Internal power supply - hot-plug |
| Installed Qty |
2 (installed) / 2 (max) |
| Power Redundancy |
Yes |
| Power Redundancy Scheme |
1+1 |
| Power Provided |
500 Watt |
| Voltage Required |
AC 120/230 V (50/60 Hz) |
| Power Consumption Operational |
127 Watt |
| 80 PLUS Certification |
80 PLUS Platinum |
| Miscellaneous |
|
| Compliant Standards |
VCCI, BSMI, EN 61000-3-2, EN55022, EN 61000-3-3, EN55024, CB, CCC, FCC, IEC 60950-1, EN 60950-1, NRTL, Directive 2006/95/EC, Directive 2011/65/EU, EAC, RCM, MSIP, Directive 2004/104/EC, EN 61000-3-11:2000, EN 61000-3-12:2011, RoHS 2011/65/EU, WEEE 2012/19/EU, EN 300 386, UL/CSA60950-1 |
| Dimensions & Weight |
|
| Width |
48.3 cm |
| Depth |
40.6 cm |
| Height |
4.4 cm |
| Weight |
7.8 kg |
| Environmental Parameters |
|
| Min Operating Temperature |
0 °C |
| Max Operating Temperature |
40 °C |
| Humidity Range Operating |
5 - 95% |
| Min Storage Temperature |
-25 °C |
| Max Storage Temperature |
70 °C |